hey guys a while back i posted a thread about my amp going into protect mode. but some shop checked it and said the amp had nothing wrong with it. well now everything works but i cant turn it up all the way cause i'll burn up the fuse anyone know whats going on i think its the wiring.
check how many fuses your amp has on it and then check the fuse in the line, if they are the same your amp may be drawing a little more to play the level you want, I would also check your grounds, make sure their on metal, not painted metal, good luck
also, a common cause for constantly blowing fuses is the amperage draw may be higher than the fuse rating besing used. if this is the case and you are using the appropiately rated fuse for the power wire, consider upgrading to larger gauage wire or doing multiple runs.
diymobileaudio.com is the DIY car audio install forum for automotive quality and spl stereo bass. 12 volt audio installation wholesalers buy amps, subs, double din car audio head unit electronics and ipod blue tooth car alarms at discounted prices