sub system for s-10?

[nick]

if he wanted to spend some morey I would run a mojo 12 inverted between the seats and do as big of a box as you can. Damn this makes me wish I hadnt sold my S10 cause now I have a mojo 12 and am looking to use it on some special project that I havnt determined yet

[ndstrctbl]

well, i know its POSSIBLE to get about 2.5 cubes back there, but he wants to be comfortable. so far i can only get 1.5 cubes back there and be comfortable too.

im only like 5' 6" so i could go up further, but he cant, he is like 6' 2"

so, im thinking of just going with 2 8's sealed. its seems like the best thing to do, and he is just loving my sonotube idea with a sub on each end. or i could go with a nice 8" sub ported.

i will check the truck out later and see if there is any more space available. do you guys think we could rip out the interior behind the seats and see if there is anymore room?

edit: does anyone know the price range of a DD 8" sub?

[nick]

I would just cut out the jack there is no more room behind the seats unless you get rid of that plastic piece under the rear glass

[ndstrctbl]

Originally Posted by nick

I would just cut out the jack there is no more room behind the seats unless you get rid of that plastic piece under the rear glass

ya, i was thinking there might be something we could take out of the truck and and get more room(besides the jack, we were going to take that out anyway)

[nick]

yea but that plastic piece probably wont give you even a cube I cut into it for an amp rack on mine but its been a wile since I had it like 2 years

[2k1 Sdime]

no.....theres not much room if you rip everything out.

Im 6' 2" too......i used to run 2 10" Visoniks when i first got the truck....just under a cube each. the box fit between the jack and drivers edge of truck.


just go with 8's or cut the wall and blow through

[justinromine]

Ok, here's what you need to do. Take the middle console and middle seat out because that is where the port and amp rack are going to go. Also take eother your passenger side seat or you driver side seat out .Get yourself two rockford fosgate T1's 10" subs and put them in 1.50 cubes of air space each. Your slot port area should be 4"x 12"x25.5". I have a 2001 GMC Sierra regular cab pick up and this set up slams. I can even do a hair trick. Here are some pics of my set up and also a vid of the hair trick.




nevermind the x7, i dont have it anymore.
Here is the vid of the hair trick with just two tens

http://www.youtube.com/watch?v=diUTfty4bAI


I am also 6'2. I still have some leg room.

[ndstrctbl]

Originally Posted by justinromine

Ok, here's what you need to do. Take the middle console and middle seat out because that is where the port and amp rack are going to go. Also take eother your passenger side seat or you driver side seat out .Get yourself two rockford fosgate T1's 10" subs and put them in 1.50 cubes of air space each. Your slot port area should be 4"x 12"x25.5". I have a 2001 GMC Sierra regular cab pick up and this set up slams. I can even do a hair trick. Here are some pics of my set up and also a vid of the hair trick.




nevermind the x7, i dont have it anymore.
Here is the vid of the hair trick with just two tens

http://www.youtube.com/watch?v=diUTfty4bAI


I am also 6'2. I still have some leg room.

i dont see the port, and plus, its a different truck. and you cant get get 2 10" t1's for under 200 dollars.

[nick]

the main problem I see with his idea is that the S10 most likely has 60/40 split seats and you cant remove the middle seat without a custom hack job from an upolstery shop or new bucket seats all together

[ndstrctbl]

Originally Posted by nick

the main problem I see with his idea is that the S10 most likely has 60/40 split seats and you cant remove the middle seat without a custom hack job from an upolstery shop or new bucket seats all together

the only thing he wants to modify in his interior is the jack, he wants it gone. so, i think 4 8" tang band or 2 10 assassins will work fine for what he wants

[nick]

what about 1 sound splinter RL-i 8 or kicker L78

[ndstrctbl]

Originally Posted by nick

what about 1 sound splinter RL-i 8 or kicker L78

he doesnt have enough Power for those, he only has about 200 dollars. then he miht go buy another amp. but the amp he has is only about 350 wrms at 2 ohm.

so, im looking for low power low cost drivers. like the tang band 8, assassin, dayton subwoofers, and maybe a single 12 handling roughly 300-400 watts

[i love spl]

are those rockford amps?

are they any good?

[nick]

the Rl-i would be perfect then the RMS on it is 350 watts and it can be had in dual 4 so it could be wired at 2ohms plus it costs $165 from the ROE store

[ndstrctbl]

Originally Posted by nick

the Rl-i would be perfect then the RMS on it is 350 watts and it can be had in dual 4 so it could be wired at 2ohms plus it costs $165 from the ROE store

oh, i thought it was like 500 rms or sumthin like that. i will look into it. maybe a single one ported would be nice

[nick]

yea heres the link to it https://www.realmofexcursion.com/stor...roducts_id/210

[ndstrctbl]

i bet he will love a single rli-8. it would prolly get pretty loud in that truck, and ppl would be like "holly ****, thats just one 8?" lol

[nick]

plus it dosnt take up much room so later down the road if he wants more he can get 3 more

[ndstrctbl]

how about this design?


just for a sinlge rli-8

[ndstrctbl]

Originally Posted by nick

plus it dosnt take up much room so later down the road if he wants more he can get 3 more

your kidding right? he isnt going to spend over 300 for subs, i know him too well.

[Violence.]

i just thought of something.

image dynamics idq 10. nto sure if they make 8's. the 10 takes a box space of .7 cubes. this is from id's website. the subs arent expensive and sound awesoem as hell. i have one. ran it for liek 5 months in my 79 camaro.


look into the idq line also. very nice stuff

[Mazda626]

Kicker L5 8" mmmmmm?

[Violence.]

im actually going to get a box built by stratus most likely. i just got a jl audio 8w7 for the back fo my truck. it will fit that space rather nicely. the way i figured it out i can keep my seat back where i drive and still abtou 1.5 cubes left. and still have room to mount amps ect. i gotta see how it will all fit once i get everything. im going to put 2 eu700 elemental design subs in the back somewhere also. just gotta figure everything out


when i get my box ill let you know how we made out. if startus gets a good design im going to have him Build the box. maybe you shoudl talk to him as well.