Factory integration help - Realm of Excursion



Head Units / Processors / Car Audio Electronics Discuss anything about head units, processors, and other car audio electronics.

Reply
Old 11-19-2012   #1 (permalink)
120 dB
 
Join Date: Apr 2012
Location: kent, oh
Posts: 86
Rep Power: 99
rustyshank1 has a solid reputation - Well liked by the forum membersrustyshank1 has a solid reputation - Well liked by the forum members
Default Factory integration help

I am looking to buy a new 2013 dodge dart it comes with an 8.4 inc touchscreen headunit that controls everything from the radio & navigation to the climate control so removing it doesnt seem like it would be straight forward... so i was wondering if anyone on here has had experience with any good line drivers or processors that will take a high level in aka Speaker Wire and give me a low level rca out so that i can put my amps and subs that i already have into this new vehicle i need 6 channels front rear and sub out. Any suggestions or relavant experience much appreciated, I have never put a system without putting in an aftermarket HU.
thanks in advance.
rustyshank1 is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 11-19-2012   #2 (permalink)
170 dB
 
Fallen's Avatar
 
Join Date: Apr 2006
Location: Ontario, Canada
Age: 32
Posts: 8,692
Rep Power: 602
Fallen has the highest rating we can give - To make it this far is  nearly impossibleFallen has the highest rating we can give - To make it this far is  nearly impossibleFallen has the highest rating we can give - To make it this far is  nearly impossibleFallen has the highest rating we can give - To make it this far is  nearly impossibleFallen has the highest rating we can give - To make it this far is  nearly impossibleFallen has the highest rating we can give - To make it this far is  nearly impossibleFallen has the highest rating we can give - To make it this far is  nearly impossibleFallen has the highest rating we can give - To make it this far is  nearly impossibleFallen has the highest rating we can give - To make it this far is  nearly impossibleFallen has the highest rating we can give - To make it this far is  nearly impossibleFallen has the highest rating we can give - To make it this far is  nearly impossible
Default Re: Factory integration help

LC2i 2ch Line Out Converter with AccuBASS(tm) and Subwoofer Control

I haven't used it, but I'm pretty sure it would suit your needs.

Here's the 6 channel variant
Line Output Converter - LC6i



__________________
Car: 2009 Audi A4 Avant Quattro
Sub amp: Hifonics ZXX-3200.1D
Subwoofers: 4 SA8V.2 @ 2 Ohms
Enclosure: 2 cu ft ported, tuned to 33Hz
Fallen is offline   Reply With Quote Quick reply to this message
Old 11-19-2012   #3 (permalink)
120 dB
 
Join Date: Apr 2012
Location: kent, oh
Posts: 86
Rep Power: 99
rustyshank1 has a solid reputation - Well liked by the forum membersrustyshank1 has a solid reputation - Well liked by the forum members
Default Re: Factory integration help

thanks for the quick reply it looks like it would work just fine ive never heard of them before but that doesnt mean a thing... what kind of sq loss should i expect from running that for my pre amps versus a head unit with built in preamps and could i still set my gains using an oscope?
rustyshank1 is offline   Reply With Quote Quick reply to this message
 
Old 11-19-2012   #4 (permalink)
Angry old man
 
sri3850341's Avatar
 
Join Date: Oct 2007
Location: Las Vegas,1971-present,someday i'll retire in Idaho
Age: 48
Posts: 5,324
Rep Power: 429
sri3850341 has the highest rating we can give - To make it this far is  nearly impossiblesri3850341 has the highest rating we can give - To make it this far is  nearly impossiblesri3850341 has the highest rating we can give - To make it this far is  nearly impossiblesri3850341 has the highest rating we can give - To make it this far is  nearly impossiblesri3850341 has the highest rating we can give - To make it this far is  nearly impossiblesri3850341 has the highest rating we can give - To make it this far is  nearly impossiblesri3850341 has the highest rating we can give - To make it this far is  nearly impossiblesri3850341 has the highest rating we can give - To make it this far is  nearly impossiblesri3850341 has the highest rating we can give - To make it this far is  nearly impossiblesri3850341 has the highest rating we can give - To make it this far is  nearly impossiblesri3850341 has the highest rating we can give - To make it this far is  nearly impossible
Default Re: Factory integration help

Audio Control has been around for yrs.. They make a solid product....
__________________
2012 Scion xB
Pioneer DEH-80PRS (active)
ZUKI Audio, Eleets, front stage amp
Rockford Fosgate PPS4-6 mids
Image Dynamics XS-28 tweets
Hifonics GLX1000.1
2 Sundown E10's with a Pete designed enclosure...




To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
sri3850341 is offline   Reply With Quote Quick reply to this message
Old 11-19-2012   #5 (permalink)
170 dB
 
Fallen's Avatar
 
Join Date: Apr 2006
Location: Ontario, Canada
Age: 32
Posts: 8,692
Rep Power: 602
Fallen has the highest rating we can give - To make it this far is  nearly impossibleFallen has the highest rating we can give - To make it this far is  nearly impossibleFallen has the highest rating we can give - To make it this far is  nearly impossibleFallen has the highest rating we can give - To make it this far is  nearly impossibleFallen has the highest rating we can give - To make it this far is  nearly impossibleFallen has the highest rating we can give - To make it this far is  nearly impossibleFallen has the highest rating we can give - To make it this far is  nearly impossibleFallen has the highest rating we can give - To make it this far is  nearly impossibleFallen has the highest rating we can give - To make it this far is  nearly impossibleFallen has the highest rating we can give - To make it this far is  nearly impossibleFallen has the highest rating we can give - To make it this far is  nearly impossible
Default Re: Factory integration help

Quote:
Originally Posted by rustyshank1 View Post
thanks for the quick reply it looks like it would work just fine ive never heard of them before but that doesnt mean a thing... what kind of sq loss should i expect from running that for my pre amps versus a head unit with built in preamps and could i still set my gains using an oscope?
You can use the oscilloscope to find out when your factory line level clips, you can use it to find out when the line output converter clips, and when your amplifier itself clips.

You won't lose much SQ, if any. The Power amplifier in your factory system is the real variable here. The LC6i is excellent, but if fed a dirty signal, it'll produce one. That said the factory system is likely decent.



__________________
Car: 2009 Audi A4 Avant Quattro
Sub amp: Hifonics ZXX-3200.1D
Subwoofers: 4 SA8V.2 @ 2 Ohms
Enclosure: 2 cu ft ported, tuned to 33Hz
Fallen is offline   Reply With Quote Quick reply to this message
Old 11-19-2012   #6 (permalink)
150 dB
 
Join Date: Nov 2011
Location: West Salem, OH
Age: 29
Posts: 1,357
Rep Power: 203
Beckerson1 has the highest rating we can give - To make it this far is  nearly impossibleBeckerson1 has the highest rating we can give - To make it this far is  nearly impossibleBeckerson1 has the highest rating we can give - To make it this far is  nearly impossibleBeckerson1 has the highest rating we can give - To make it this far is  nearly impossibleBeckerson1 has the highest rating we can give - To make it this far is  nearly impossibleBeckerson1 has the highest rating we can give - To make it this far is  nearly impossibleBeckerson1 has the highest rating we can give - To make it this far is  nearly impossibleBeckerson1 has the highest rating we can give - To make it this far is  nearly impossibleBeckerson1 has the highest rating we can give - To make it this far is  nearly impossibleBeckerson1 has the highest rating we can give - To make it this far is  nearly impossibleBeckerson1 has the highest rating we can give - To make it this far is  nearly impossible
Default Re: Factory integration help

You can also look into the Audison Bit 10 or the Bit 10D
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Beckerson1 is offline   Reply With Quote Quick reply to this message
Old 11-19-2012   #7 (permalink)
120 dB
 
espresso's Avatar
 
Join Date: Jan 2009
Location: Panama City, Panama
Posts: 39
Rep Power: 135
espresso is still in the green - This is good
Default Re: Factory integration help

This is what I am using...
high level inputs 3 4V RCA outs.
http://forum.realmofexcursion.com/he...ntegrator.html

http://www.precisionpower.com/html-v...es/INT-5B.html

__________________
1996 Suburban -
Kenwood DPX308U & Thrive Tablet
Rear: PPI S2000.1D & 3 JBL GT5-12D's, Sealed 4.5 cu ft
Mid/Front: PPI S580.5 & PPI 6.5" door speakers.
Highs(fronts & mid) PPI S420.2 & PPI 3/4" tweeters
PPI INT5B OEM intergrator/ bass processor
E2 power/ground/rca cables
espresso is offline   Reply With Quote Quick reply to this message

Reply

  Realm of Excursion » Car Audio Discussion » Head Units / Processors / Car Audio Electronics

Bookmarks

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Realm of Excursion forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
05 Malibu Security Integration blackdragonx1186 Head Units / Processors / Car Audio Electronics 1 09-12-2012 06:27 AM
04 chevy malibu stereo integration questions. fosg8freak General Car Audio & SPL Discussion 3 12-28-2011 12:54 PM
Should I keep the factory HU? Elderban Head Units / Processors / Car Audio Electronics 9 08-26-2010 01:27 AM
OEM integration hardballer7 Head Units / Processors / Car Audio Electronics 5 05-08-2008 05:15 PM
WTB Honda Accord Factory Integration A boltpride Want To Buy 5 02-23-2008 02:55 AM

» Amps
A/d/s/
Advent
Alphasonik
Alpine
American Bass
ARC Audio
Atomic
Audio Art
Audio Gods
Audiobahn
Audiocontrol
Audiopipe
Audison
Aura
Autotek
Avionixx
Bazooka
Beyma
Blaupunkt
Boss
Boston Acoustics
Bravox
Cadence
Cascade (CAE)
CDT Audio
Cerwin Vega
Clarion
Clif Designs
Concept
Coustic
Critical Mass
Crossfire
Crunch
DB Drive
DC Audio
DC Power
DEI
Denon
Diabolo
Diamond
Digital Designs
Directed
DLS
Dual
DYnamat
Dynaudio
Earthquake
Eclipse
Elemental Designs
ESX
Eton
Farenheit
Fi Car Audio
Focal
Fusion
Genesis
Ground Zero
Hafler
Helix
Hertz
Hifonics
Hushmat
Image Dynamics
Infinity
Interfire
JBL
Jensen
JL Audio
JVC
Kenwood
Kicker
Knu Konceptz
Kole Audio
Kove Audio
Lanzar
Lightning Audio
Linear Power
MA Audio
Magnat
Marantz
Massive Audio
MB Quart
McIntosh
Memphis
Metra
MMATS
Mobile Authority
Morel
MTX
Nakamichi
Niche Audio
O2 Audio
Ohio Generator
Optima
Orion
Oxygen Audio
OZ Audio
PG Audio
Phase Linear
Phoenix Gold
Pioneer
Polk
Power Acoustik
Powerbass
Powermaster
Precision Power
Profile
Pyle
Pyramid
RadioShack
Rainbow
Rampage
RE AUdio
Rockford Fosgate
Scanspeak
Scosche
Seas
Sony
soundstream
Sparkomatic
SPL Dynamics
Stinger
Sundown Audio
Swiss Audio
Targa
TC Sounds
TREO Engineering
TRU
Tsunami
Ultimate
US Acoustics
US Amps
Velodyne
Vifa
Viper
Visonik
Xtant
Zapco
Zed Audio
Powered by vBadvanced CMPS v3.2.3

Links
Buy car audio
buy & sell car audio stereo equipment. Purchase used amps, subs speakers for sale and buy classified listings for 12 volt amplifier and subwoofer sales forum
Car Audio Forum
Buy car audio, Sell mobile audio, Wholesale 12 volt, automotive community forum, sub sub woofer, speakers, amplifier, amps, car audio forum
DIYMA
diymobileaudio.com is the DIY car audio install forum for automotive quality and spl stereo bass. 12 volt audio installation wholesalers buy amps, subs, double din car audio head unit electronics and ipod blue tooth car alarms at discounted prices
Sound Deadener
Sound deadening, vibration damper, cld tile, damping mat. Anti vibration pads for automotive insualtion damping, CDL mat, sound damping, noise killer, vibration damper sound deadener


All times are GMT -7. The time now is 11:23 PM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Friendly URLs by vBSEO 3.6.0 ©2011, Crawlability, Inc.
ABMM Powered by Syrian Medical Society
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.