Theft isn't too big of an issue here, plus the box should weigh a fair amount and will be bolted in. If they are gonna get it, they are gonna get it. Doesn't really matter what you do.
08-19-2006 07:34 PM
Impulse_AK
if it was my system I wouldnt mount the amps on the box for multiple reasons, like theifs getting everything all at once when they break in, buts its your system you design it how you like it.
08-19-2006 07:26 PM
Fixxer
Prolly carpet it and make a little wider board on the back to mount the amps or something.. I'll let them worry about that.
08-19-2006 07:23 PM
Impulse_AK
No problem, its a Saturday night and I have nothing else to do
08-19-2006 07:20 PM
Fixxer
Thanks for your help
08-19-2006 07:18 PM
Impulse_AK
sorry I forgot about the port length lol... its 11.74 long inches to give you 33hz, and I already did all the calculating and measuring it doesnt need to be bent, less resistance more airflow and SPL
08-19-2006 07:11 PM
Fixxer
Can you give me an inside view?
I need to know how long to make the port boards and which way to bend them..
08-19-2006 06:49 PM
Impulse_AK
kinda small..... but it works, save it and zoom in if you need to see it better
ok yep thanks everything will work fine, I have a paint picture to give you a rough idea im going to try to post
08-19-2006 06:21 PM
Fixxer
Quote:
Originally Posted by Impulse_AK
check my last post and measure it up, I think it would work nicely, this time there should be about 2 inches of space between each sub and the port, if you have the sub with you can you measure it for me with the gasket on?
They are down at the shop, but here is a install sheet.. mine are 3510's
check my last post and measure it up, I think it would work nicely, this time there should be about 2 inches of space between each sub and the port, if you have the sub with you can you measure it for me with the gasket on?
08-19-2006 06:10 PM
Fixxer
Quote:
Originally Posted by Impulse_AK
oh I see, I thought you wanted a Square port.....you want a rectangular one, just in the middle, let me see....
Yeah, my bad.. I thought you might missread me but i didn't say anything. sorry
08-19-2006 06:01 PM
Impulse_AK
oh I see, I thought you wanted a Square port.....you want a rectangular one, just in the middle, let me see....
Edit: Ok ignore other posts, Length 30.00, Width 16.00, Depth 19.63, Port 11 x 2.5in 27.5c cubic inches of port,port should be about the same size as subs diameter
08-19-2006 06:00 PM
Fixxer
Is it gonna look similar to this? If not could you make the port bigger?
08-19-2006 05:53 PM
Impulse_AK
ok I came up with.....4cf internal airspace tuned to 33hz, Lenght 30.69, Width 16.00, Depth 19.21, Port right in between subs a Square 5.2 X 5.2 12.59 Inches long giving you about 27 square inches of port, the design would actually look really nice if you carpet it and you should have about 1 inch of space away from the port from each side, all using 1 inch MDF
Edit: ummm keep all dimensions except box Length because im not too sure about the subs exact outer diameter with the gasket on... so I changed it to, Length 35.00in, Width 16.00, and Depth 16.96in.... basically 17.00 in, with same port
08-19-2006 05:18 PM
Fixxer
The box for my brahma is 41 1/2" wide ---- 16" Tall ---- 2 ft deep thats including the space in the back for the amps.
41 1/2" is max width because there are wheel wells further out.
Just roughly in ED's enclosure calculator I came up with 41x16x15.5 tuned to 32hz is about 4.101 cF
08-19-2006 05:09 PM
Impulse_AK
ok give me a few minutes, got any specific L X W X H dimensions???
08-19-2006 05:03 PM
Fixxer
ok.. Just design something that would sound great and tuned low for daily driving. Again with a square port in the middle of the 2 10's.
08-19-2006 04:55 PM
Impulse_AK
ummm....I can give you the box design but you must add the slope to the back of the box....simple you just need a MDF peice of wood cut it to mount flush with the back of the box, the sides and the bottom.....it'll take me longer to design one with the slope adding to internal airspace and trying to explain the dimemnsions...
08-19-2006 04:47 PM
Fixxer
Subs firing back with the port in the middle... 30-32hz, wedge style with the back slopped for the amp rack/tub made with 1" mdf.. bout 4^ft total after displacement.... would that be good for a daily driver?
08-19-2006 04:18 PM
Impulse_AK
port up with subs up??? or port back with subs back??? give me some more info and also what hz do you prefer??
08-19-2006 01:37 AM
Fixxer
Box for 2 10" 3510D's
Could someone with leet box building skills blue print me up a 4^ft common chamber with a square port in the center tuned to 32hz.. The box design needs to be a wedge type with the back sloped to I can use it as an amp rack. This will be going into a 92 ford explorer. It will also be made out of 1" MDF and probably carpeted.
buy & sell car audio stereo equipment. Purchase used amps, subs speakers for sale and buy classified listings for 12 volt amplifier and subwoofer sales forum
diymobileaudio.com is the DIY car audio install forum for automotive quality and spl stereo bass. 12 volt audio installation wholesalers buy amps, subs, double din car audio head unit electronics and ipod blue tooth car alarms at discounted prices