Originally Posted by soloxp

I'm trying to learn how to build slot boxes, this will be my first box with out using (RE Box Cal). Can someone double check to see if the port is right. The box is 15h x 36w x 25d. Looking for around 27-28hz for 2 X12.

Thanks

x12.png Photo by soloxp | Photobucket

x12.jpg Photo by soloxp | Photobucket

Originally Posted by soloxp

if i understand you, 15x36x24 is the max dimension i that will fix. box will be firing in to the car

Originally Posted by KickinBlazer

with at least 4.5 inches of space on the port side of box it would effectivlly lower tuning another 2hz....and mount the woofers closer together and away from the port opening inside the box that will help port tuning aswell

Originally Posted by soloxp

Cool, thanks again. good night

Originally Posted by soloxp

So 4.75 is best over 4.5?

Originally Posted by soloxp

Thanks, I appreciate your help. I'll do the box in sketchup sometime today and post it to see if i put the sub in the right place.

Originally Posted by KickinBlazer

o damn you got plenty of power on tap .....ummm sundown recomends 2 cube per sub in high power aplications and 2.75 and higher on rated or lower power

Originally Posted by soloxp

SAZ-3500 v2