You need all of that stuff to run your subwoofer, except for the fact that you can use your stock factory headunit.
__________________ Refs: Shon (owner of ROE) x2, Tony (on ROE), DL97, Armageddon, uncfanforlife07, Shawn Fleming, Jybfan04 , Toxic Tuan and To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
i really like the solo x alot but i dont know whut is like the spl in a 3 cuft enclosure and im gonna deff be only pushing about 2000 watts rms to it cause i dont want it to blow on me plus im only gonna use it for daily driving
read The Hifonics Goliath Subwoofer Line-up at the bottom
Thats still not right. They say 2.83 volts which is not 1 watt! That completely depends on the impedance. There is no way a 12" high excursion subwoofer is going to get anything close to even 90dB sensitivity.
ok well his stock alt will only put out about 1728max watts and about 1221 rms so at most saying you have the battery Power to back it up you can go times that meaning you sugguest something smaller .I personally would say this amp
You guys, these sensitivities are not consistent. They are measured with very low impedances to get high SPL's but that doest make them more sensitive. I'm telling you, you need to measure them at 1 watt and you need to look at BL^2 divided by Re to really get a feel for how efficient the subwoofer is (give the moving mass is not abnormally large and the suspension is overly restrictive)
You'll also find thoes figures are often hidden, and now you know why, lol.
diymobileaudio.com is the DIY car audio install forum for automotive quality and spl stereo bass. 12 volt audio installation wholesalers buy amps, subs, double din car audio head unit electronics and ipod blue tooth car alarms at discounted prices